Integrate Siemens Solid Edge with your ERP

Go from Solid Edge to manufacturing 5x faster.

Intelligent, bi-directional automation that turns your Solid Edge assemblies and sheet metal parts into the items, BOMs, and routings your ERP builds from.

Talk to an Expert

Integrate Your CAD
System With SYSPRO

Go from engineering to manufacturing 5x faster!

Talk to an Expert

Solid Edge integration

CADTALK ERP is an off-the-shelf, bi-directional integration between Siemens Solid Edge and your ERP. It reads assemblies and part properties from Solid Edge and transforms the engineering BOM into manufacturing-ready items, BOMs, and routings.

Solid Edge is a go-to for sheet metal, and sheet metal is where rules pay off. CADTALK's rules can assign the right stock material and add the cutting, bending, and finishing operations your shop runs, so the ERP gets a routed part, not just a line on a BOM.a

Schedule a Demo

Key Solid Edge integration features

Reads Solid Edge assemblies and part properties. No re-keying, no custom development.
Rules assign stock materials and add routing operations for sheet metal and fabricated parts.
No additional component needed alongside Solid Edge.
Reads Solid Edge alongside other CAD sources in the same integration.

Why getting Solid Edge and your ERP talking pays off

Every Solid Edge assembly that gets re-keyed into the ERP is time engineers aren't designing, and a chance for the shop to build from the wrong BOM.

Sheet metal parts that arrive routed

Rules turn part data into stock material and operations, so planners don't add them by hand.

How CADTALK works with Solid Edge

Step 1: Read

CADTALK reads the assembly and part properties from Solid Edge.

Steps 2 to 4:

See the process

Frequently Asked Questions

Does CADTALK support ECC Control? Yes CADTALK supports the ECC Control
How does CADTALK ERP handle revisions in SYSPRO?
CADTALK compares revisions in CAD/PDM/PLM with SYPRO Version or release field and merges the necessary changes.
How does CADTALK ERP support uploading media like images and PDF drawings to SYSPRO?
CADTALK supports uploading images and documents to SYSPRO both manually and automatically through the intelligence engine.
What fields does CADTALK ERP support in SYSPRO?
CADTALK supports every field on SYSPRO Stock Codes, Structures and Routings, including Custom form Fields, and other areas like Supplier Cross References, Warehouses, and Manufacturers.
Does CADTALK ERP add parts to the SYSPRO structures that are not in the CAD/PDM/PLM System?
Yes, users can use the CADTALK intelligence engine and the interface to search SYSPRO and add non-CAD parts to the bill of material.
Does CADTALK require a CAD license?
No, CADTALK can read most CAD files without a CAD license

Frequently Asked Questions

Does CADTALK need extra software installed alongside Solid Edge?

No additional component is required.

We also run Teamcenter. Can CADTALK read from there?

Yes. CADTALK reads Teamcenter too. See the Teamcenter page (link once live).

More questions about CADTALK in general? See the Integration Hub FAQ.

Still keying Solid Edge BOMs into your ERP?

Book 30 minutes with a CADTALK solutions engineer. Talk to an expert.

Case Studies

Integration Hub

The CADTALK process